Anchor 1
A ship's anchor, the fitting that holds a vessel in position by gripping or digging into the seabed.
40 products
Hull Outfittings
Anchors, chains, deck fittings, doors and hatches, rudders, ropes and accommodation panels.
In this category
Anchor 2
A ship's anchor, the fitting that holds a vessel in position by gripping or digging into the seabed.
Anchor 3
A ship's anchor, the fitting that holds a vessel in position by gripping or digging into the seabed.
Anchor 4
A ship's anchor, the fitting that holds a vessel in position by gripping or digging into the seabed.
Anchor 5
A ship's anchor, the fitting that holds a vessel in position by gripping or digging into the seabed.
Anchor Chain & Accessory 1
Fittings and hardware used with anchor chain: shackles, swivels, and the connectors that join chain lengths.
Anchor Chain & Accessory 2
Fittings and hardware used with anchor chain: shackles, swivels, and the connectors that join chain lengths.
Anchor Chain & Accessory 3
Fittings and hardware used with anchor chain: shackles, swivels, and the connectors that join chain lengths.
Apu Block
A rudder trunk bearing block that supports the rudder stock and permits it to rotate under load.
Bathroom Equipment 1
Sanitary fixtures fitted out for shipboard accommodation, built to marine standards for weight, corrosion and motion.
Bathroom Equipment 2
Sanitary fixtures fitted out for shipboard accommodation, built to marine standards for weight, corrosion and motion.
Bathroom Equipment 3
Sanitary fixtures fitted out for shipboard accommodation, built to marine standards for weight, corrosion and motion.
Bathroom Equipment 4
Sanitary fixtures fitted out for shipboard accommodation, built to marine standards for weight, corrosion and motion.
Cable Guide
A hull fitting that channels mooring or towing line to a fairlead or winch at a controlled angle.
Clear View Screen
A high-speed rotating disc set into a wheelhouse window that spins spray and rain off the glass for an unobstructed view.
Door
A weathertight or watertight steel door for exterior openings and compartment boundaries aboard a vessel.
Double Column Bollard
A twin-post deck bollard for securing mooring lines, offering two independent standing points on one base.
Electric & Pneumatic Wiper
A bridge window wiper driven by an electric motor or compressed air, built for continuous duty in marine weather.
Fairlead
An open guide fitting that lets a mooring or towing line run smoothly over a deck edge or through a bulwark.
Fairlead 2
An open guide fitting that lets a mooring or towing line run smoothly over a deck edge or through a bulwark.
Furniture 1
Fixed and semi-fixed furniture built for shipboard cabins and common areas, secured against motion at sea.
Furniture 2
Fixed and semi-fixed furniture built for shipboard cabins and common areas, secured against motion at sea.
Furniture 3
Fixed and semi-fixed furniture built for shipboard cabins and common areas, secured against motion at sea.
Furniture 4
Fixed and semi-fixed furniture built for shipboard cabins and common areas, secured against motion at sea.
Gangway
A boarding ramp or ladder rigged between vessel and quay, adjustable for tide and berth height.
Hybrid Vortex Reducing Fin
A hull appendage that breaks up hull-generated wake vortices ahead of the propeller to recover propulsive efficiency.
Manhole Cover 1
A bolted or hinged cover sealing access to a tank, void or compartment below deck.
Manhole Cover 2
A bolted or hinged cover sealing access to a tank, void or compartment below deck.
Panel
A prefabricated interior panel for lining bulkheads and deckheads in accommodation and working spaces.
Quick Closure Valve
A hand-operated valve designed for rapid shut-off of a fuel, ballast or bilge line from a remote position.
Ropes
Fibre rope for mooring, towing and general deck work, selected for strength, stretch and resistance to marine wear.
Rudder Blade
The flat, streamlined surface that deflects water flow to steer a vessel, mounted on the rudder stock.
Rudder Horn
A fixed hull structure that carries the lower rudder bearing on a semi-spade or horn-type rudder arrangement.
Rudder Pintle
The pin that locates and bears a rudder in its gudgeon, forming the hinge the rudder swings on.
Rudder Stock
The vertical shaft that transmits steering torque from the steering gear down to the rudder blade.
Side Ventilator
A hull-mounted vent with a weathertight cowl that supplies fresh air below deck while keeping sea spray out.
Single Pillar Bollard
A single-post deck bollard for making fast one mooring line, the most compact fitting of the bollard family.
Ceiling Board
A prefabricated ceiling board for lining deckheads in accommodation and working spaces.
Steel Wire Rope
Wire rope laid from steel strands around a core, for mooring, lifting and standing rigging where fibre rope lacks the strength.
Window
A fixed or opening marine window, framed and gasketed for the wind and spray loads of an exterior bulkhead.
OPS
Request a quote
We answer fastest on WhatsApp. Tell us the product, the quantity and the vessel, and we will come back with a price and a lead time.
Phone
+62 823 8542 4700Phone
+62 813 7709 6245Address
Workshop Cipta Grand City, Blok K39, Tanjung Uncang, Batu Aji, Batam 29424, Indonesia
View on map